The CCPAM1010 is a single VDSL2 port modem equipped with four Ethernet ports by embedded 10/100Mbps Ethernet Switch. Compliant with ITU-T G.993.2 VDSL2 standard, the CCPAM1010 interoperates with major chipsets, and supports Profile 30a with line rate up to 100Mbps/100Mbps for various bandwidth-consuming applications, like video streaming or Video on Demand. Besides forwarding Ethernet packets between VDSL2 port and Ethernet ports, CCPAM1010 also provides Hardware IGMP snooping for IGMP v1/v2 to facilitate IPTV services without interfering with other applications.

The CCPAM1010 complies with the international standards and interoperates with other major/open chipsets. It supports different profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a); different band plans (997, 998, and proprietary) and different annex types (Annex A, Annex B and Annex C), by factory settings to fit into different requirements. Benefit from the latest chip design technology, CCPAM 1010 consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to make device up and running.

In addition to using one CCPAM1010 to connect to ISP/Telco's DSLAM for accessing Internet or video services, users can utilize a pair of CCPAM1010 for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. With two 1010 modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or to have surveillance service a little farther over existing twisted-pair phone cables.

The CCPAM1010 is easy to use. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to access the Internet or watch IPTV instantly.

 Features & Specifications

VDSL2 Compliance

• Compliant with VDSL2 Standard, ITU-T G.993.2

• VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a

• Supports 997 and 998 Band Plans

• Supports Annex A, Annex B and Annex C

• Upstream/Downstream connection rates greater than 100/100Mbps

• OLR (On Line Reconfiguration), UB0 Supported

• Supports Ethernet 802.3ah

Network Protocols and Features

• Transparent bridging

• Ethernet over VDSL (EoVDSL) Bridging

• IEEE 802.3/3u compliant

• Hardware IGMP Snooping for IGMP v1/v2

Management

• Simple management function via console port

• Firmware upgradable (on demand)

Hardware Specifications

Physical Interface

• VDSL: one RJ-11 connector

• DIP Switch: DIP2 for configuring RT/COT mode

• Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch

• Console:RS232, for management function

• Power jack

• Power switch

Physical Specifications

• Dimensions: (200mm x 145mm x 34mm)

Power Requirements

• Input: 12V DC, 1A

Operating Environment

• Operating temperature: 0 - 40 °C

• Storage temperature: -20 - 70 °C

• Humidity: 20 - 95% non-condensing